Fujitsu AIRSTAGE UTY-ASGXZ1 Operating Manual page 40

Unit operation
Go to the unit location and start the unit operation with a remote controller. The units
started will be listed in the order they are started on this list and will be numbered in
that order.
For the indoor units already allocated a No., No. cannot be updated even by
Note
executing this operation. When No. must be reallocated, execute it after clearing
the No.( )
Selecting units
When units are recognized and numbered, double click on the unit. The name registra-
tion dialog box will appear.
Naming units
Enter the name for the unit and click "OK".
Stop registration
Click "Stop" when finished with the registration.
Note When the operation
If this operation was not performed, the indoor unit will not operate properly
thereafter. (Indoor unit fan will not operate.)
End registration
Click "Close" to end manual setting registration.
Clear button
Clear the No. (
by this operation, the indoor unit can be operated at
Instead of registering names for each start operation, you may operate all the
Note
units and name all the units at once after stopping registration.
38
was executed, always end registration by this operation.
) of an arbitrarily selected indoor unit. When indoor unit was cleared
.
Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.