Note
•
Units that cannot be acquired by address checker are not scanned.
•
When the same address is displayed at outdoor units or indoor units, it indi-
cates that the address is duplicated. (Except RB unit and S/V series outdoor
unit/indoor unit) However, address duplication is not always acquired, de-
pending on network data collision, and other effects.
•
When the RB unit is in the following states, the addresses are not displayed.
- When not connected to indoor unit
- When connected indoor unit power is off
Total unit list
Displays the number of outdoor units and indoor units and RB units and the total num-
ber of units (outdoor units + indoor units + RB units) displayed at
Multi type RB units are counted by duplicating the number of units connected to piping
individually. (Maximum ( units) Therefore, the number of displayed RB units may be
larger than the actual number of units.
Clear button
Clears the list of
When the list is cleared, the scanning by [Checked address] cannot be performed.
Start button
Address check Start/End button. When not performing an address check, this serves
as the [Start] button, and when performing an address check, this serves as the [End]
button.
Close button
Closes this window. When performing an address check, this button is disabled.
Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.
. When performing an address check, this button is disabled.
.
2(