4-3-2
Remote Setting
Function (Field) setting can be performed for indoor units by remote controller. (V-II/J-II/J-IIS/
J-III/J-IIIL/VR-II/V-III series)
(Some settings cannot be supported.)
The processed result can also be output to a CSV file.
Adaptor selection
Selects the transmission adaptor which connect the system containing units which per-
form processing.
Unit type
Selects the unit type of the unit which is to perform processing.
Target switch
Displays the item of the local Function(Field) setting item. (No. + name)
Unit list
Displays a list of addresses (refrigerant No. - unit No.) of the target unit selected at
and
.
In addition, multiple units can be handled simultaneously by arbitrary selection (back-
ground blue color) for target unit selection.
This list displays the following information, in addition to address.
•
Read value
Displays the value of the item selected by combo box of
unit.
3(
acquired from the target
Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.