Table of Contents
Advertisement
6. Preparation for installing the DECK
. Preparation for installing the PDW-HD1500/PDW-F1600
(1) Removing the handle
Remove the two +K4 x 14 screws, and remove the two handle holders, the handle, and the two spacers.
(2) Removing the feet
Loosen the four screws that fix the feet, and remove the four feet.
m
. Store the removed parts in a safe place.
. Install the handle and the feet back to the DECK when using it as a standalone device outside the CART.
K4 x 14
Handle holders
Spacers
. Preparation for installing the PDW-F70/PDW-F75
(1) Install the PDBK-A640 when mounting the PDW-F70, PDW-F75 on the CART.
(Refer to the Operation Manual of the PDBK-A640.)
(2) Install the PDBK-104 when mounting the PDW-F75. After mounting, set the Video INPUT to SDSDI or
COMPOSIT using the F1 function key on the upper right of the LCD on the DECK.
(Refer to the Operation Manual of the PDBK-104.)
PDJ-A640 IM
Handle
PDW-HD1500/F1600
Feet
Screw
Bottom
Foot
3-11 (E)
Advertisement
Table of Contents
