6.4 Checking Procedure
Display shown in Figure 6-2 automatically appears on the PC screen. If there is no problem
in the I/O module configuration, press the [Y] key and then the [ENTER] key.
Then the I/O configuration information will be written in the nonvolatile memory in the
module.
How to see the display in Figure 6-2:
(1) For the basic unit
SLOT (0) is the slot at the right of the FL654.
(2) For the expansion unit
SLOT (0) is at the left end of the available slots.
6F8C1120
6.4 Checking Procedure
23
6