Grease Lubrication Points - Polaris RZR XP 1000 2014 Service Manual

MAINTENANCE

GREASE LUBRICATION POINTS

There are grease fittings at each front A-arm pivot point, each rear torsion bar bushing and on the front propshaft
yokes. Apply grease until all traces of water have been purged out at each of these areas.
ITEM METHOD
Front A-arm
Grease 3 fittings on each side
Pivot Bushings
of the vehicle
Front Stabilizer
Grease the fitting on each side
Bar Bushings
of the vehicle
(FOX and INT'L)
Grease 2 fittings through the
Rear Stabilizer Bar
skid plate access holes on
Bushings
each side of the vehicle
Grease middle and rear
Propshaft Yokes
fittings
*There is no grease point on the upper control arm rear mount.
2.8
q
w
e
r
RECOMMENDED LUBE
Polaris All Season Grease
Polaris All Season Grease
Polaris All Season Grease
Polaris Premium U-Joint Grease
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
FREQUENCY
Grease fittings every 500
miles (800 km); Grease
before long periods of
storage, and after
thoroughly washing or
submerging the vehicle
© Copyright Polaris Industries Inc.