Drive Belt; Belt Removal - Polaris RZR XP 1000 2014 Service Manual

DRIVE BELT

BELT REMOVAL

NOTE
Inspect the entire clutch outlet duct (including the outlet
duct screen) when replacing a drive belt. Remove any
debris found in the outlet duct or outlet duct screen
1. Remove the eight screws that retain the outer clutch
cover.
2. Maneuver the outer clutch cover outward as shown
below to access the drive belt.
NOTE
Removal of left rear wheel or left rear shock is NOT
necessary for belt replacement.
3. Mark the drive belt direction of rotation so that it can
be installed in the same direction.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
4. Insert clutch spreader tool
into the driven clutch as shown (tool included with
vehicle's tool kit).
Make sure the tool is square with the moveable sheave
q
.
surface of the driven clutch.
5. Rotate tool towards the clutch to open the sheaves.
6. Walk the belt out of the driven clutch and drive
clutch. Remove the belt from the vehicle.
PVT SYSTEM
w
(2877408 or 2878925)
NOTE
5.17
5