Camera System Alignment; Initial Setting For Switches - Sony Betacam SX DNV-5 Maintenance Manual

8-1. Initial Setting for Switches

Execute the camera system alignment using the SVC mode
in the SETUP menu. When the setting mode is changed
SVC, set switches as follows.
1. Set the POWER switch to off.
2. S4-1 (DCP-1 board) → ON
3. Turn the power ON.
4. Set the MENU switch ON.
n
When adjustment is performed in the SVC mode, the
values of items adjusted in the ENG and USER mode
become 0.
DNV-5
DNW-7/90/90WS
Section 8

Camera System Alignment

Initial Setting
Before performing adjustment, set switches as follows, If
the setting of the GAIN switch is changed from the factory
set value, reset it to its original value by referring to the
operation manual.
Inside panel:
VTR SAVE/STBY switch
GAIN switch
OUTPUT/DCC switch
MENU switch
WHITE BAL switch
Front panel:
SHUTTER switch
Filter selector
Lens :
LENS
IRIS
SETUP menu:
. MASTER GAIN
. FUNCTION 1/2
. FUNCTION 2/2
. LEVEL 3
. LEVEL 4
→ STBY
→ L (0 dB)
→ CAM/OFF
→ OFF
→ PRST
→ OFF
→ 1
→ MANU
→ (CLOSE)
→ 0 dB
LOW
→ 9 dB
MID
→ 18 dB
HIGH
→ ENC
TEST OUT
→ ON
DATAIL
→ OFF
SKIN TONE DTL
→ OFF
MATRIX
→ ON
GAMMA
→ ON
CHROMA
→ OFF
TEST SAW
→ ON
GENLOCK
→ OFF
CAM RET
→ ON
FILTER INH
→ ON
KNEE SELECT
→ ON
WHITE CLIP
→ ON
R-Y
→ ON
B-Y
8-1