Table of Contents
Advertisement
Operation
8
Operations under access level 2
76 | 151
3. Select 'Isolation' and press
Isolation
1 - Detection
2 - Sounders
3 - RT outputs
4 - Fire control
5 - Control dev.
6 - Door holder device
4. Select 'Detection' and press
Isolation- Detection
1 - Zone
2 - Device
5. Select 'Zone' and press
Detection - Zone
01 Zone 1 (ON)
02 Zone 2 (ON)
T1 Zone T1 (ON)
6. Select the desired zone and press
Do you want to disable device?
Yes (OK) or No (C)
7. Press
to confirm. The selected zone is disabled and the 'Isolation' LED is on.
Refer to steps 1~6 to enable a zone.
.The 'Isolation' window is open.
L2
. The 'Detection' window is open.
L2
. A list of all zones is displayed.
L2
. A confirmation dialog window is open.
A6V10421795_en--_k
Advertisement
Table of Contents
