A6V10421795_en--_k
–
'Action': 'Allow the connection'
4. Select the 'Protocol and Ports' tab.
5. Set the following values:
–
'Protocol type': 'UDP'
–
'Local port': 'Specific Ports', and then enter the value range '69' in the box.
–
'Remote port': 'All Ports'
6. Confirm with 'OK'.
The new firewall rule is now configured.
NOTICE
●
Deactivate the above configurations after firmware update.
Supported web browsers
Once there is a functioning Ethernet connection, 'FC360 Desktop Editor 2.0' and
'FC360 Panel Configurator' can be accessed via one of the following browsers:
●
Google Chrome Version 71 (or above)
●
Microsoft Edge Version 81 (or above)
●
Firefox Standard Version 77 (or above)
Commissioning
Setting Windows firewall
115 | 151
10