Siemens FC361 Series Technical Manual page 145

A6V10421795_en--_k
Outputs parameters of I/O modules
Devices Output Mode
FDCIO221 Inactive: Off / Active: On
FDCIO222 Inactive: Off / Active: On
FDCIO224 Inactive: Off / Active: On
FDCIO361 Inactive: Off / Active: On
The default settings of 'Not in use' is 'No' for all the devices above.
Alarm device parameters
Devices Volume
FDS224 High
FDSx226 High
FDS225 High
FDSx227 High
FDS364 -
FDS366 -
FT2010 floor repeater parameters
Items
1. List faults
2. Not used
3. List isolations
4. List technical messages
5. Activate/deactivate sounders
6. Isolate RT fire
1
By default, both function keys and LEDs are disabled. Change the default
settings to Yes to enable function keys and LEDs.
Appendix G: Default settings for panel/devices
Fail safe
Freeze
Freeze
Freeze
Freeze
Beacon Intensity
-
Low
-
Low
-
Medium
1
Default settings
No
No
No
No
No
No
21
Output style
Monitored output
-
-
Monitored output
Silent sounder
-
-
-
-
-
-
145 | 151