System Parameters Screen - Huawei UPS2000-G-6KRTS User Manual

UPS2000-G- (6 kVA-20 kVA)
User Manual

4.6.3.3 System Parameters Screen

●
Issue 18 (2021-07-16)
Item Description
Bypass Set the output dry contact associated
mode with bypass mode. When the UPS is
in bypass or ECO mode, this dry
contact is enabled.
Batt. Set the output dry contact associated
underv with low battery voltages. When the
olt system battery voltage is low, this
dry contact is enabled.
BPS Set the output dry contact associated
backfe with bypass backfeed. When a bypass
ed backfeed alarm is generated, this dry
contact is enabled.
Faulty Set the output dry contact associated
UPS with UPS faults. When a critical
alarm is generated, this dry contact is
enabled.
Parallel screen
Figure 4-28 Parallel screen
Table 4-18 Parallel settings
Item Description
Single/Parallel Specifies whether the UPS
works in single mode or
parallel mode. This
parameter is configurable
only after the inverter is
shut down.
Redundant UPSs Set the number of redundant
UPSs. This parameter is
configurable only after the
inverter is shut down.
Copyright © Huawei Technologies Co., Ltd.
4 Control Panel
Default Value Range
Value
Dry Dry contacts 1–
contact 6
3
Dry Dry contacts 1–
contact 6
4
Dry Dry contacts 1–
contact 6
5
Dry Dry contacts 1–
contact 6
6
Default Value Range
Value
Single Single, Parallel
0 0–3
60