Mechanical Safety; Equipment Operating Environment - Huawei UPS2000-G-6KRTS User Manual

UPS2000-G- (6 kVA-20 kVA)
User Manual
●
●
●
●

1.5 Mechanical Safety

Moving Heavy Objects
When pulling the equipment out of a cabinet, be aware of unstable or heavy
objects on the cabinet to prevent injury.
●
●
●
●
●
●
●

1.6 Equipment Operating Environment

The UPS is used for commercial and industrial purposes only. It cannot be used as
a power supply for life support devices.
Issue 18 (2021-07-16)
If any liquid is detected inside the equipment, immediately disconnect the
power supply and contact the administrator.
Do not expose the equipment to flammable or explosive gas or smoke. Do
not perform any operation on the equipment in such environments.
Ensure that the equipment room provides good heat insulation, and the walls
and floor are dampproof.
Install a rat guard at the door of the equipment room.
D ANGER
Be cautious to avoid injury when moving heavy objects.
When moving the equipment by hand, wear protective gloves to prevent
injuries.
Move or lift the equipment by holding its handles or lower edges. Do not hold
the handles of modules (such as power supply units, fans, and boards) that
are installed in the equipment because they cannot support the weight of the
equipment.
Avoid scratching the cabinet surface or damaging cabinet components and
cables during equipment transportation.
When transporting the equipment using a forklift truck, ensure that the forks
are properly positioned so that the equipment does not topple. Before moving
the equipment, secure it to the forklift truck using ropes. When moving the
equipment, assign dedicated personnel to take care of it.
Choose railways, sea, or a road with good conditions for transportation to
ensure equipment safety. Avoid tilt or jolt during transportation.
Move the cabinet with caution. Any bumping or falling may damage the
equipment.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
6