Nokia 9500 MPR User Manual page 828

Release 7.0.0 3DB 19286 ACAA Issue 01
Configure radio parameters
5. Open the XPIC Configuration tool. See
6. Select Horizontal Radio port and drag to draw line to Vertical RADIO port.
7. Click OK.
8. Click Apply.
9. Click Close.
10. From the MPT Main View, select the 1+0 Horizontal radio channel and verify the
828
• Rx Freq
ii. From the Option drop-down menu, choose gain configuration identical (Std/
XPIC) to the values provisioned for the horizontal radio channel (step
iii. Click Apply.
iv. Provision Vertical radio channel XPIC Configuration Polarization to Vertical.
v. Click Apply.
XPIC Configuration tool displays. See
XPIC Association pop-up displays. See
correct radio channel is shown for the Associated Interface Vertical radio
channel. See Figure 607
channel.
Figure 604.
Figure 605.
Figure 606.
for an example of a Provisioned Horizontal XPIC radio
WebEML User Manual
3 ii).