Release 7.0.0 3DB 19286 ACAA Issue 01
Provision Protection Type
Figure 589
P2E3DS3 Protection Type provisioned
To provision SDH Protection Type
Note: When provisioning ports for 1+1 EPS Protection, provision the main ports. Then only
enable the spare ports. Then re-provision 1+1 EPS protection.
Note: It is not possible to enable a port while 1+1 EPS protection is enabled. To grow an
SDH port after 1+1 EPS protection is provisioned, the operator must disable 1+1 EPS
protection. Enable the new port. Then re-provision 1+1 EPS protection.
1. Select the card to provision with protection in the resource tree area. This
2. From the Protection Type drop-down menu, select no Protection or 1+1 EPS.
778
selection should also highlight the card in blue on the graphical representation
of the MSS shelf in the resource list area. See
WebEML User Manual
Figure
588.