Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 198
Configuration Cross Connection window
2.
To provision a PDH to Radio Cross connection
1. Select PDH port and drag to draw line to RADIO port.
Caution: When parallel radio paths exist between two MSS shelves, port
segregation should be provisioned between the parallel radio paths at both ends
to prevent a loss of traffic.
Verify port segregation provisioning. Port segregation should be provisioned
between parallel radio paths at both ends when they exist on the NE. Also port
segregation should be provisioned between the radio port and other Ethernet
and/or radio ports where connectivity is not desirable. See
segregation/connectivity
PDH-RADIO pop-up displays. See
for detailed steps to view/provision port segregation.
Figure
199.
Provision cross connections
Provision port
363