Program Loop With Condition At Start Of Loop (While, Endwhile) - Siemens SINUMERIK 840D sl Programming Manual

Flexible NC programming
1.12 Check structures
1.12.4

Program loop with condition at start of loop (WHILE, ENDWHILE)

Function
For a WHILE loop, the condition is at the beginning of the loop. The WHILE loop is executed
as long as the condition is fulfilled.
Syntax
WHILE <condition>
...
ENDWHILE
Significance
WHILE:
ENDWHILE:
<condition>:
Example
Program code
...
WHILE $AA_IW[DRILL_AXIS] > -10
G1 G91 F250 AX[DRILL_AXIS] = -1
ENDWHILE
...
114
Initiates the program loop.
Marks the end of the loop and results in a return jump to the beginning
of the loop.
The condition must be fulfilled so that the WHILE loop is executed.
Comments
; Call the WHILE loop under the following
condition: The actual WCS setpoint for the
drilling axis must be greater than -10.
Programming Manual, 06/2009, 6FC5398-2BP20-0BA0
Job Planning