Siemens SINUMERIK 840D sl Programming Manual page 781

Job planning
Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents

Advertisement

Note
During a check with, STRINGIS should no other coding be found, then the corresponding
NC language command can be programmed and 2xx coding applies.
2xx value ranges of the detailed information
Detailed Information
200
201
202
203
204
205
206
207
208
209
210
211
Job Planning
Programming Manual, 06/2009, 6FC5398-2BP20-0BA0
14.4 Check scope of NC language present (STRINGIS)
Significance of the test result:
Interpretation not possible
A DIN address or NC address is defined, i.e. whether names
have recognized the address letters from this, see comments
(1)
G codes from the existing groups of G code have been
recognized.
NC language functions with return value and parameter transfer
are present.
NC language functions with return value and parameter transfer
are present.
NC key words are present.
General, axial or channel-specific machine data ($M...),
setting data ($S...) or option data($O...) are present.
User variables, such as NC system variables beginning with
$... or computing parameters beginning with R are present.
The cycle names have been loaded in NCK and cycle programs
are also activated, see comment (2).
The defined name has been recognized and activated GUD
variable found by global user variables (GUD variables) .
The macro names along with the names defined and macros
activated in the macro definition files have been found, see
comment (3).
Of local user variables (LUD variables) whose name is
contained in the current program.
Additional functions
781

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 828dSinumerik 840de sl

Table of Contents