Note
Writing machine data
When writing an item of machine or setting data, it is important to ensure that the access
level which is active when the part program/cycle is executed permits write access and that
the data is set to take "IMMEDIATE" effect.
References
A list of the properties of all system variables appears in:
/PGA1/ Parameter Manual, System Variables
See also
Data types (Page 57)
1.1.3
Predefined user variables: Arithmetic parameters (R)
Function
Arithmetic parameters or R-parameters are predefined user variables with the designation R,
defined as an array of the REAL data type. For historical reasons, notation both with array
index, e.g. R[10], and without array index, e.g. R10, is permitted for R-parameters.
When using synchronized actions, the $ sign must be included as a prefix, e.g. $R10.
Syntax
When used as a preprocessing variable:
R<n>
R[<expression>]
When used as a main run variable:
$R<n>
$R[<expression>]
Job Planning
Programming Manual, 06/2009, 6FC5398-2BP20-0BA0
Flexible NC programming
1.1 Variables
19