Siemens SINUMERIK 840D sl Programming Manual page 464

Tables
16.1 Operations
Operation Meaning
3) Activation of collision detection for the
G460
approach and retraction block
G461 Insertion of a circle into the TRC block
G462 Insertion of a straight line into the TRC
block
Deactivation of all adjustable frames,
3)
G500
basic frames are active
G505 to G599 5 ... 99th adjustable work offset
3) Block change on exact stop fine
G601
G602 Block change on exact stop coarse
G603 Block change at IPO block end
G621 Corner deceleration at all corners
G641 Continuous-path mode with smoothing
as per distance criterion (=
programmable rounding clearance)
G642 Continuous-path mode with smoothing
within the defined tolerances
G643 Continuous-path mode with smoothing
within the defined tolerances (block-
internal)
G644 Continuous-path mode with smoothing
with maximum possible dynamic
response
G645 Continuous-path mode with smoothing
and tangential block transitions within
the defined tolerances
G700 Inch dimensions for geometric and
technological specifications (lengths,
feedrate)
Metric dimensions for geometric and
3)
G710
technological specifications (lengths,
feedrate)
464
1) 2)
W Description see
PGsl
m
Approach and retraction with enhanced retraction
strategies (G460, G461, G462) [Page 309]
PGsl
m
Approach and retraction with enhanced retraction
strategies (G460, G461, G462) [Page 309]
PGsl
m
Approach and retraction with enhanced retraction
strategies (G460, G461, G462) [Page 309]
PGsl
m
Settable work offset (G54 to G57, G505 to G599, G53,
G500, SUPA, G153) [Page 159]
PGsl
m
Settable work offset (G54 to G57, G505 to G599, G53,
G500, SUPA, G153) [Page 159]
PGsl
m
Exact stop (G60, G9, G601, G602, G603) [Page 325]
PGsl
m
Exact stop (G60, G9, G601, G602, G603) [Page 325]
PGsl
m
Exact stop (G60, G9, G601, G602, G603) [Page 325]
m PGAsl
PGsl
m
Continuous-path mode (G64, G641, G642, G643,
G644, G645, ADIS, ADISPOS) [Page 328]
PGsl
m
Continuous-path mode (G64, G641, G642, G643,
G644, G645, ADIS, ADISPOS) [Page 328]
PGsl
m
Continuous-path mode (G64, G641, G642, G643,
G644, G645, ADIS, ADISPOS) [Page 328]
PGsl
m
Continuous-path mode (G64, G641, G642, G643,
G644, G645, ADIS, ADISPOS) [Page 328]
PGsl
m
Continuous-path mode (G64, G641, G642, G643,
G644, G645, ADIS, ADISPOS) [Page 328]
PGsl
m
Inch or metric dimensions (G70/G700, G71/G710)
[Page 177]
PGsl
m
Inch or metric dimensions (G70/G700, G71/G710)
[Page 177]
Programming Manual, 09/2011, 6FC5398-1BP40-2BA0
Fundamentals