Geometry settings
8.3 Dimensions
Meaning
Modal axis-specific diameter programming
DIAMONA:
DIAM90A:
DIAMOFA:
DIACYCOFA:
<axis>:
184
Command for the activation of the independent axis-specific diameter
programming
The effect of DIAMONA is independent of the programmed dimensions
mode (G90/G91 or AC/IC):
•
for G90, AC:
Dimensions in the diameter
•
for G91, IC:
Dimensions in the diameter
Command for the activation of the dependent axis-specific diameter
programming
The effect of DIAM90A depends on the programmed dimensions mode:
•
for G90, AC:
Dimensions in the diameter
•
for G91, IC:
Dimensions in the radius
Command for the deactivation of the axis-specific diameter programming
Axis-specific radius programming takes effect when diameter
programming is deactivated. The effect of DIAMOFA is independent of the
programmed dimensions mode:
•
for G90, AC:
Dimensions in the radius
•
for G91, IC:
Dimensions in the radius
Command for the deactivation of axis-specific diameter programming
during cycle processing.
In this way, computations in the cycle can always be made in the radius.
The last G function active in this group remains active for the position
indicator and the basic block indicator.
Axis identifier of the axis for which the axis-specific diameter
programming is to be activated
Permitted axis identifiers are as follows:
•
Geometry/channel axis name
or
•
Machine axis name
Range of
The axis specified must be a known axis in the
values:
channel.
Other conditions:
•
The axis must be permitted for the axis-specific
diameter programming via
MD30460 $MA_BASE_FUNCTION_MASK.
•
Rotary axes are not permitted to serve as
transverse axes.
Programming Manual, 09/2011, 6FC5398-1BP40-2BA0
Fundamentals