Other information
15.5 Identifiers
15.5
Identifiers
The commands according to DIN 66025 are supplemented with so-called identifiers by the
NC high-level language.
Identifiers can stand for:
•
System variables
•
User-defined variables
•
Subroutines
•
Keywords
•
Jump markers
•
Macros
Note
Identifiers must be unique. It is not permissible to use the same identifier for different objects.
Rules for names
The following rules apply when assigning identifier names:
•
Maximum number of characters:
-
-
-
•
Permissible characters are:
-
-
-
•
The first two characters must be letters or underscores.
•
Separators are not permitted between the individual characters.
Note
Reserved keywords must not be used as identifiers.
436
For program names: 24
Axis identifiers: 8
Variable identifiers: 31
Letters
Numbers
Underscores
Programming Manual, 09/2011, 6FC5398-1BP40-2BA0
Fundamentals