Brake Test Options; Repetition Of Sub-Task (Clear Last); Parking Brake On Front Axle - Bosch BSA 43 Series Original Instructions Manual

en 66 | BSA 43xx | Super automatic mode
7.3

Brake test options

7.3.1

Repetition of sub-task (Clear Last)

i
This option is deactivated in the standard configuration.
Step
¶
After end of peak value display
i
The Clear-Last-Option is displayed for 3 seconds.
¶
Give a brief braking pulse (braking force is configura-
ble).
7.3.2

Parking brake on front axle

i
This option is deactivated in the standard configuration.
Step
¶
Option appears after the peak values or the Clear-
Last-Option of the front axle (sub-task 1) were
displayed.
i
The option "parking brake on front axle" is displayed
for 3 seconds.
¶
Give a brief braking pulse (braking force is configu-
rable).
|
1 691 606 210 2015-07-29
Result / Display
 The dynamometer motors start up, the test rollers
turn
 Screen "running hourglass"
 Results of the current sub-task (1, 2 or P) are dele-
ted.
"
The current sub-task is repeated.
Result / Display
 The dynamometer motors run, the test rollers turn
 Screen "Parking brake on front axle"
 Switching to parking brake.
(test procedure 1-2-P ⇒ 1-P-2)
"
Parking brake measurement commences.
Robert Bosch GmbH