en
60 | BSA 43xx | Automatic mode
6.
Automatic mode
i
Automatic mode is recommended for rapid
performance of one or more measurements not
requiring verification of the measured data.
6.1
Mode activation and deactivation
Step
¶
Acitvate automatic mode.
¶
Deactivate automatic mode.
6.2
Test sequences
6.2.1
Brake dynamometer BSA 43xx / BSA 44xx
Step
1. Check prerequisites:
R
No vehicle on dynamometer!
R
Tester/test routine selected.
R
"Automatic" mode selected.
|
1 691 606 210
2015-07-29
Principal features:
R
Test sequence can be selected by user.
R
Automatic starting of measurements.
R
No storage of measurement results.
R
No print-out of measurement results.
Remote control unit
Press Automatic
Press STOP
Result / Display
Left: "Brake dynamometer" device symbol.
Right: Drive-on prompt.
Result / Display
Mode indicator:
"Automatic" symbol
Mode indicator:
"Manual mode" symbol
Robert Bosch GmbH