Bosch BSA 43 Series Original Instructions Manual page 47

Step
1. Exit from test routine.
2. Select tester.
3. Confirm tester selected.
i
List only appears if several
test routines are available
for the tester.
4. Select test routine.
5. Confirm test routine selected.
i
The test routine can be terminated at any time with the Esc key or the 2
Robert Bosch GmbH
Keypad Remote control unit
Press one after the
other
or
or
Operation | BSA 43xx | 47
Result / Display
 Measurement mode is
terminated.
 Main window is displayed.
+
 The tester currently selected is
highlighted by a red border.
or
 Tester is selected.
 A list of the available
test routines appears.
 The test routine currently
selected is highlighted by
yellow lettering.
or
 Test routine starts.
 Drive-on prompt appears on
screen.
"
Test routine is selected.
+ STOP buttons.
nd
1 691 606 210
en
|
2015-07-29