Storing Measured Values; Display Repetition; Deleting Stored Values - Bosch BSA 43 Series Original Instructions Manual

en 58 | BSA 43xx | Manual mode (normal operation)
5.3.2

Storing measured values

Step
¶
Assignment and storage of current
measured values:
R
Front axle.
R
Rear axle.
R
Parking brake:
$
Default:
parking brake rear axle
$
Assignment of the parking brake to
the front axle
5.3.3

Display repetition

Step
¶
Display measured values stored:
R
Front axle service brake.
R
Rear axle service brake.
R
Parking brake.
¶
Display out-of-roundness.
¶
Display stored total weight.
5.3.4

Deleting stored values

Step
¶
Deletion of last measured value stored
(CL = Clear Last).
¶
Deletion of all stored values
(CA = Clear All).
|
1 691 606 210 2015-07-29
Remote control unit
+ 2 s +
Remote control unit
+
+
+
+
+
Remote control unit
+
Result / Analog display
"
The current measured values are
stored.
i
Assignment of the parking brake to the
front axle is only possible within 5 se-
conds after pressing the button.
"
The current measured values are
stored.
Result / Analog display
"
The stored brake measured values are
displayed.
"
The out-of-roundness is displayed.
"
The stored total weight is displayed.
Result / Analog display
 The last measured value stored is dele-
ted (e.g. rear axle service brake measu-
red value).
 All the stored values are deleted
(weights, measured values).
Robert Bosch GmbH