Isdn Options - NEC ASPILA EX Feature Manual

Program 20 : System Option Setup

20-25 : ISDN Options

20-25 : ISDN Options
Level:
IN
Description
Input Data
652 Programming
• Available.
Use Program 20-25 : ISDN Options to define the ISDN system options.
Item No.
01 Send the Release Message After Subscriber
Hangs Up
02 Progress Indicate Information Element Detect
03 Bearer Capability Select from SLT Outgoing
04 Send DT Until User Dials the First Digit
(Overlap Sending Mode)
With Overlap Sending Mode, if the network
side stops dial tone when CLI is included in the
SETUP message, the system sends dial tone
until the user dials the first digit instead of the
network.
05 T305 Timer Start Afteer Sending Disconnect
Message
06 Call Proceeding Send Mode
07 Busy Tone Mode Set When Disconnect Mes-
sage Received
08 Use of Low Layer Compatibility (LLC)
09 Use of High Layer Compatibility (HLC) Send-
ing
10 S-Point Terminal Seizes Analogue Trunk
11 Automatic Changing System Clock When
Date/Time Information Element Received
12 Incoming Calls Forwarded Out Automatically
Return Connect Message When Outgoing Call
Receives Alerting Message
Aspila EX
Item Input Data Default
0 = Service On 0
1 = Service Off
0 = Service On 0
1 = Service Off
0 = 3.1KHz 0
Audio
1 = Speech
0 = Service On 0
1 = Service Off
0 = Service On 0
1 = Service Off
0 = Service On 0
1 = Service Off
0 = Busy Tone 0
from NT (net-
work side)
0 = Use 0
1 = Not Used
0 = Use 0
1 = Not Used
0 = Disable 0
1 = Enable
0 = Disable 0
1 = Enable
0 = Disable 0
1 = Enable
Aspila EX Software Manual