NEC ASPILA EX Feature Manual page 355

Related Features
Operation
Aspila EX Software Manual
Tandem Trunking (Unsupervised Conference)
•20-11-14 : Class of Service Options (Hold/Transfer Service) - Trunk-to-Trunk Transfer
Disable (0) the Trunk-to-Trunk Transfer Restriction option.
Central Office Calls, Answering / Central Office Calls, Placing
Other programmed options for incoming and outgoing calls can affect how calls are handled.
Check or program these options as needed.
Conference, Voice Call
Set up a Conference with a co-worker in your immediate work area.
Meet Me Conference
Meet Me Conference lets an extension user set up a Conference via Paging.
Meet Me Paging
Meet Me Paging lets an extension user set up a two-party meeting via Paging.
Method A - Tandem Trunking from Conference
To set up a Tandem Call:
1. Place or answer first trunk call.
2. Press CONF key.
3. Place or answer second trunk call.
4. To add more calls to the tandem call, repeat from Step 2.
or to set up the tandem call, press CONF key twice.
This sets up a Conference between you and both outside parties.
5. Press Transfer key (PGM 15-07 or SC 851: 06).
To end the Tandem Call:
1. Press either flashing line key.
The line keys light steadily (green). You can listen (i.e., monitor) to the call or rejoin
the conversation, based on the setting in Program 20-13-10.
2. Press SPK or Hang up.
If Program 20-13-10 is set to "0", the Conference ends and the line keys go out.
If Program 20-13-10 is set to "1", to disconnect the Conference, you must use Forced
Trunk Disconnect (i.e., Press the line key + 724).
Method B - Tandem Trunking on Hang up
To set up a Tandem Call:
1. Place or answer first trunk call.
2. Press HOLD to place the first trunk call on Hold.
3. Place or answer second trunk call.
4. Press Transfer key (PGM 15-07 or SC 851: 06) or hang up.
This sets up an Unsupervised Conference with both outside parties.
The line keys for the trunks light steadily (red).
To disconnect the Conference, use Forced Trunk Disconnect (i.e., Press line key + 724).
Features 341