NEC ASPILA EX Feature Manual page 377

Programming (Cont'd)
Aspila EX Software Manual
•14-06-01 : Trunk Group Routing
Set up an outbound routing table (1-100) for trunk groups assigned in Program 14-05.
•14-07-01 : Trunk Access Map Setup
Access Map programming may limit Trunk Group Routing options.
•15-06-01 : Trunk Access Map for Extensions
Access Map programming may limit Trunk Group Routing options.
•15-07 : Programming Function Keys
Assign a function key for Trunk Group Routing access (code *02 + trunk group 001-100).
•21-02-01 : Trunk Group Routing for Extensions
Assign the routes set in Program 14-06 to extensions.
•21-15-01 : Alternate Trunk Route for Extensions
Designate the trunk route accessed when a user dials the Alternate Trunk Route Access Code
assigned in Program 11-09-02. Trunk Group Routing is set up in Program 14-06.
•23-03-01 : Universal Answer/Auto Answer
Assign trunk routes set in Program 14-06 to extensions for Universal Answer. If the call ring-
ing the paging system is in an extension's assigned route, the user can dial the Universal
Answer code (872) to pick up the call. This program also allows an extension user to automat-
ically answer trunk calls ringing other extensions, based on Trunk Group Routing program-
ming (defined in Program 14-06). (Trunk Group Routing=1-100)
•25-10-01 : Trunk Group Routing for DISA
Assign the Trunk Group Route chosen when a user places a DISA call into the system and
dials 9. The Trunk Group Routing is defined in Program 14-06. If the system has ARS, dialing
9 accesses ARS. The route chosen is based on the DISA Class of Service, which is determined
by the password the caller dials.
•25-12-01 : Alternate Trunk Group Routing for DISA
Define the trunk route selected when a DISA caller dials the Alternate Trunk Access Code
assigned in Program 11-09-02. The route selected is based on the DISA caller's Class of Ser-
vice, which is in turn determined by the password the caller dial. Program 14-06 is used to set
up the Trunk Group Routing.
•34-03-01 : Trunk Group Routing for E&M Tie Lines
Use this program to assign the Trunk Group Route (1-100) chosen when a user seizes a tie
line and dials 9. Set Trunk Group Routing in Program 14-06. If the system has ARS, dialing 9
accesses ARS.
Trunk Group Routing
Features 363