Incoming Virtual Extension Ring Tone Setup - NEC ASPILA EX Feature Manual

15-08 : Incoming Virtual Extension Ring Tone Setup

Level:
IN
Description
Input Data
Incoming Ring Pattern
0- Tone pattern 1
1- Tone pattern 2
2- Tone pattern 3
3- Tone pattern 4
4- Incoming extension ring tone
Internal Incoming Signal
Conditions
Aspila EX Software Manual
Program 15 : Extension Basic Setup
15-08 : Incoming Virtual Extension Ring Tone Setup
• Available.
Use Program 15-08 : Incoming Virtual Extension Ring Tone Setup to assign a ring tone range
(0-4) to incoming virtual extensions assigned to a Virtual Extension key (Program 15-07). If you
enable ringing for the key in Program 15-09, the key rings with the tone you set in this program.
Also see Program 22-03. The chart below shows the available tones.
Extension Number
Incoming Signal
Frequency
Pattern
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Frequency
None
Aspila EX
Default
0: Tone pattern 1 When an extension or a virtual extension is
assigned to the function key on the key telephone,
select the ring tone when receiving a call on that
key.
Type Frequency 1
High 1100
Middle 660
Low 520
High 1100
Middle 660
Low 520
High 1100
Middle 660
Low 520
High 1100
Middle 660
Low 520
High 1100
Middle 660
Low 520
Max. 8 digits
Description
Frequency 2 Modulation
1400
760
660
1400
760
660
1100 Envelope
660 Envelope
520 Envelope
1100 No modulation
660 No modulation
520 No modulation
1400
760
660
Programming
16Hz
16Hz
16Hz
8Hz
8Hz
8Hz
8Hz
8Hz
8Hz
581