NEC ASPILA EX Feature Manual page 254

Operation
240 Features
Transferred DID, DIL, DISA and tie line calls do not require ring group programming.
To place a call on a loop key:
1. Press outgoing or both ways loop key.
You hear dial tone and the key lights green.
2. Dial number.
To answer a call on a loop key:
Listen for ringing a look for a flashing loop key.
1. Press loop key.
The key lights green and you connect to the call.
If there are additional calls waiting to be answered, your display shows:
WAITING - LOOP KEY
To program a loop key:
1. Press the SPK key.
2. Dial 852.
3. Press the key you want to program as a loop key.
4. Dial *05.
5. Dial the loop key type:
• 0 = Incoming only
• 1 = Outgoing only
• 2 = Both ways (incoming and outgoing)
6. Dial the loop key routing option for incoming, outgoing, or incoming and outgoing calls:
• 000 = Trunk Group Routing or ARS (if installed)
• 001-200 = Trunk Groups
If you selected option 2 in step 5 above, enter the incoming Trunk Group followed by
the outgoing Trunk Group.
7. Press SPK to hang up.
Loop Keys
Aspila EX Software Manual