Voipu Pcb Dhcp Server Mode Setup - NEC ASPILA EX Feature Manual

Program 84 : Hardware Setup for VoIP

84-04 : VoIPU PCB DHCP Server Mode Setup

84-04 : VoIPU PCB DHCP Server Mode Setup
Level:
IN
Description
Input Data
DHCP Server Mode
Conditions
Feature Cross Reference
Telephone Programming Instructions
998 Programming
• Available.
Use Program 84-04 : VoIPU PCB DHCP Server Mode Setup to define whether or not the
DHCP Server on the VoIPU PCB is used.
Item Input Data
0:Disable
1:Enable
None
• VoIP
To enter data for Program 84-04 (VoIPU PCB DHCP Server Mode Setup):
1. Enter the programming mode.
2. 84 04
84-04-01
DHCP Serv.Mode0:Off
­
back
3. Enter the number of the item you want to program.
84-04-nn
nnnnn
¬
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you've exited that series's programming section.
Aspila EX
Default
0 Define whether or not the DHCP Server is used.
¯
select
®
Description
Aspila EX Software Manual