Safety Requirements And Notes - Bosch Start Line TCE 420 Original Instructions Manual

en 30 | Start Line TCE 420 | Symbols used
2.3

Safety requirements and notes

¶
The TCE 420 must only be operated by authorized
personnel who have received special training.
¶
The manufacturer assumes no liability for any
direct or indirect damage arising from modification
of the TCE 420 without the permission of the
manufacturer.
¶
The TCE 420 machine comes from the factory
with a complete set of instructions and warning
signs. If for some reason these have been damaged
or destroyed, they must be replaced.
¶
The TCE 420 must be kept away from flammable
and explosive materials.
¶
The TCE 420 must also be kept out of direct
sunlight and glare.
¶
The installation site must be well ventilated.
¶
Be sure to use original parts and accessories.
¶
The TCE 420 must be installed by authorized
personnel in the manner described in the operating
manual.
¶
During operation, you should pay attention whether
there is any danger. If a hazard is detected, shut
off the TCE 420 immediately and notify the
authorized dealer.
¶
When the tire changer running, unauthorized
personnel should be kept away from the machine.
¶
The operator must wear protective gear such as
protective gloves, safety goggles and overalls to
prevent accidental injury.
¶
The protective conductor must be connected
correctly.
¶
When the tire changer is being operated,
unauthorized personnel should be kept away from
the machine.
¶
Failure to observe the requirements for operation
or to heed the warnings related to the dangers
specified in the operating manual poses the risk of
injuries to the operators or personnel nearby.
¶
The TCE 420 must be operated by technically
capable personnel. The operator must have received
special training and understood the requirements in
the operating manual.
¶
He or she must also understand related safety
requirements and the requirements for operation.
¶
The operator must not operate the TCE 420 after
consuming alcoholic beverages.
|
1 695 108 074 2016-07-27
¶
The operator must pay attention to the following:
$
All requirements in the operating manual must be
understood.
$
The operating principle of the tire changer must
be clear.
$
Unauthorized personnel should be kept away
from the TCE 420 during operation.
$
It is necessary to ensure that installation of the
TCE 420 complies with applicable local laws
and regulations.
$
It must be ensured that the operators have
received training and have the skill to operate the
TCE 420, and they must be monitored.
$
Do not detach bolts, nuts or the other
components from the TCE 420.
$
Do not touch the motor and live parts on the
machine such as connection cables before the
voltage supply has been disconnected.
$
Carefully read the operating manual and learn
how to use the TCE 420 correctly and safely.
$
Keep the operating manual for the future
reference.
¶
Do not detach the danger labels, safety warnings
and operation tips on the TCE 420.
¶
If there is any damage, please contact the local
authorized dealer promptly.
$
During the process of use and maintenance, the
operator should pay attention to the danger of
the high electrical voltage.
$
Do not modify the TCE 420 or use anything
other than original parts.
$
The operators must wear tight overalls, gloves,
safety goggles, and safety shoes, etc.
$
When the operator makes operation or
maintenance, it is forbidden to wear loose
clothes, necklace or long hair.
Robert Bosch GmbH