User Information; Important Notes; Safety Instructions; Electromagnetic Compatibility (Emc) - Bosch TCE 4540 Original Instructions Manual

en 28 | TCE 4540 | User information
2.

User information

2.1

Important notes

Important information on copyright, liability and warran-
ty provisions, as well as on equipment users and com-
pany obligations, can be found in the separate manual
"Important notes on and safety instructions for Bosch
Tire Equipment". These instructions must be carefully
studied prior to start-up, connection and operation of
the TCE 4540 and must always be heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found in the
separate manual "Important notes on and safety instruc-
tions for Bosch Tire Equipment". These instructions must
be carefully studied prior to start-up, connection and
operation of the TCE 4540 and must always be heeded.
2.3

Electromagnetic compatibility (EMC)

The TCE 4540 is a class A product as per EN 61 326.
|
1 695 105 790 2010-05-04
3.

Product description

3.1

Designated use

TCE 4540 is a modern tire changer for mounting and
demounting of car and truck tires.
i
TCE 4540 has to be used exclusively for the specified
purpose and only in the functioning scope shown in
these instructions. Any other use different from that
specified has to be considered improper and there-
fore not allowed.
i
The manufacturer is not liable for any damage
caused by improper use.
3.2

Requirements

TCE 4540 has to be installed on an even surface made
of concrete or similar materials, and has to be firmly
anchored. A pneumatic connection is requested.
3.3

Delivery specification

Denomination
TCE 4540
Wheel lift moving part
Bead lifting lever
Centring cone Ø 70 ‒ 110 mm
Centring cone Ø 44 ‒ 80 mm
Quick lock nut
Tubeless inflation kit
Rubber cover for tightening flange
Mounting paste brush
Translatable drive pin nylon cap
Hook shaped protection
"S" shaped protection
Bayonet rubber holder
Adjustable bead pressing arm
3.4

Special accessories

Denomination
Kit PAX
Kit for close central hole rims
and for reverse rims
Locking kit with centering co-
nes Ø 120 ‒ 174 mm
Centring cone Ø 89 ‒ 132 mm
Nylon adjusting ring for flange lifting
Centring cone Ø 42 ‒ 65 mm
Video camera
Monitor
Order code
1 695 104 322
1 695 102 683
1 695 101 023
1 695 101 025
1 695 101 057
1 695 103 858
1 695 103 304
1 695 100 123
1 695 103 959
1 695 104 278
1 695 104 279
1 695 040 325
1 695 104 376
Order code
1 695 104 056
1 695 104 055
1 695 104 054
1 695 653 449
1 695 104 256
1 695 632 500
1 695 043 103
1 695 043 036
Robert Bosch GmbH