Safety Requirements And Notes; Usage; General Safety Precautions - Bosch TCE 260 Operation Manual

R
Machine nameplate
$
Each machine is equipped with the appointed
technical parameter and serial number.
Warning
It is prohibited to dismantle the nameplate on the ma-
chine.
R
Each machine is equipped with the appointed techni-
cal parameter and serial number.
Symbol Meaning
V Voltage supplied to the machine
A Rated current when the ma-
chine is running
Kw Power
Hz Frequency
Ph Phase of power supply
bar Operating air supply pressure
Serial N. Machine's serial number
ISO 9001 Certified management system
CE CE safety marks
R
The completed information of machine model and
serial number will be helpful for our technical per-
sonnel to provide you with the service and technical
support and also make it more accurate and easier
to change the parts. If there is difference between
the data in the manual and the data on the name-
plate, the one on the nameplate should be conside-
red to be correct.
2. Safety requirements and
notes
2.1

Usage

1. This machine is used to demount/ mount the car
tire. The dimension of the rim is 10"-26". The max
diameter of the wheel can reach 1050mm.
2. Any other usage will be incorrect.
3. Special statement: the manufacturer will not bear
any responsibility to any damage arising from the
operation not specified in the manual.
2.2

General safety precautions

1. This machine can only be operated by the authorized
personnel who have received special training.
2. The manufacturer will not bear any responsibility
to any direct or indirect damage arising from the
modification to the machine without the permission
of the manufacturer.
3. When the machine is delivered out of the factory,
which is equipped with the complete instruction
manual and warning signs. If they are damaged or
ruined for some reasons, please ask the manufactu-
rer to change.
Robert Bosch GmbH
Safety requirements and notes | TCE 260 | 7
4. The machine should be kept away from the inflam-
mable and explosive materials. It should also be kept
from sun and glare. The place to place the machine
should be good ventilation.
5. Make sure to use the original parts and accessories.
6. The machine should be installed by the authorized
personnel as per the manual.
7. During operation, you should pay attention whether
there is any danger. Once you find the danger, stop
the machine at once and contact the dealers.
8. When the machine is running, the unauthorized per-
sonnel should be kept away from the machine.
9. The operator should wear the protective equipments
such as gloves, goggle and overalls to prevent the
accidental injury.
Warning
Secure that the grounding of the machine is perfect.
Warning
When operate the machine, the unauthorized personnel
should be kept away from the machine.
Warning
Non-compliance to the operation requirement or the
warning requirements related to the danger specified
in the manual will cause the injuries to the operators
or personnel nearby. Before connect the machine to
the power supply, please carefully read the manual and
warning notes. The machine must be operated by the
profession personnel. The operator must have received
special training and understood the requirement in the
manual. He or she should also understand related safe-
ty requirement and detailed requirement in the process
of operation. The operator must not operate the machi-
ne after drinking.
R
The operator must pay attention to:
$
Understand all the requirements specified in the
manual;
$
Understand the function of the machine;
$
Unauthorized personnel should be kept away from
the machine;
$
Secure the installation of the machine should
comply with the related local law and regulation;
$
Secure that the operators have received the trai-
ning and have the skill to operate the machin, and
they must be monitored;
en
|
1 987 AT7 374 2015-09-02