Ip Protocols - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

The table contains the following columns:
● Select
Select the check box in the row to be deleted.
● Service Name
Shows the name of the ICMP service.
● Protocol
Shows the version of the ICMP protocol.
● Type
Specify the ICMP packet type. A few examples are shown below:
– Destination Unreachable
– Time Exceeded
– Echo-Request
● Code
The code describes the ICMP packet type in greater detail. The selection depends on the
selected ICMP packet type.
With "Destination Unreachable", for example "Code 1" host cannot be reached.
4.9.5.6

IP protocols

On this WBM page, you can configure user-defined protocols, e.g. IGMP for multicast groups.
You select a protocol name and assign the service parameters to it. When you configure the IP
rules, you simply use this protocol name.
Description
The page contains the following:
● Protocol Name
Enter a name for the protocol.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
IP frame cannot be delivered.
Time limit exceeded
Echo request, better known as ping.
Configuring with Web Based Management
4.9 "Security" menu
277