Configuring with Web Based Management
4.8 "Layer 3" menu
Table 2 has the following columns:
● Port
Shows the available ports.
● Setting
Specify the LLDP functionality. The following options are available:
– Rx
– Tx
– Rx & Tx
– "-" (disabled)
Procedure
1. Select the LLDP functionality of the port from the "Setting" drop-down list.
2. Click the "Set Values" button.
4.8
"Layer 3" menu
4.8.1
Static routes
On this page, you specify the routes via which data exchange can take place between the
various subnets. Dynamic routing protocols are not supported, for example RIP, OSPF.
230
This port can only receive LLDP frames.
This port can only send LLDP frames.
This port can receive and send LLDP frames.
This port can neither receive nor send LLDP frames.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08