Dns; Dns Client - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Configuring with Web Based Management
4.5 "System" menu
4.5.16

DNS

4.5.16.1

DNS Client

On the WBM page you specify whether or not the device uses the DNS server of the network
provider or another DNS server.
Description
The page contains the following boxes:
● DNS client
Enable or disable depending on whether the device should operate as a DNS client.
● Used DNS Servers
Specify which DNS server the device uses:
– learned only
– manual only
– all
● DNS Server Address
Enter the IP address of the DNS server.
The table has the following columns:
● Select
Activate the check box in the row to be deleted
188
The device uses only the DNS servers assigned by DHCP.
The device uses only the manually configured DNS servers. The DNS servers must be
connected to the Internet. A maximum of two DNS servers can be configured.
The device uses all available DNS servers.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08