Yamaha MTX Series Setup Manual page 89

15.
Set the [UNIT ID] rotary switch and DIP switch of the devices.
You will set the computer's IP address after completing the wizard, in
If the devices are not nearby, you can set them during the step
Make the following settings.
MTX5-D
XMV4280
XMV4280-D
[HIGH]
[LOW]
"Specifying the computer's TCP/IP
"Connecting the
UNIT ID = 04
[UNIT ID] rotary switch = 4
DIP switches are all OFF (upward)
UNIT ID = 30
[UNIT ID] rotary switch = 0
DIP switch 1 and 2 are ON (downward), others are OFF
(upward)
UNIT ID = 31
[UNIT ID] rotary switch [HIGH] = 3
[UNIT ID] rotary switch [LOW] = 1
Example 4) A system using Dante
equipment."
MTX Setup Manual
address."
89