Example 2) High audio quality system with XMV and YDIF connections (digital connections)
This repeats the system of example 1, replacing the amps with an XMV series unit.
Kitchen
(Zone 4)
DCP
ID=3
Microphone
Ch=2
This example assumes that you're using the following equipment.
• MTX3 × 1
• DCP1V4S × 4
• XMV4280 (four channels of amplification) × 1
• Speakers (the number needed)
• SD memory card × 1
• Background music source such as a CD player × 1
• Network switch × 1
• Paging microphones with switch × 2
• Wireless microphone receivers (2 channels)
• Wireless microphones × 2
The number of speakers is not specified; choose amps that are suitable for your speaker setup. You will also need to
provide the appropriate number of cables.
Microphone
Microphone
DCP
Ch=3
Ch=4
ID=0
Hall A
(Zone 1)
Hall B
(Zone 2)
Microphone
DCP
Ch=1
ID=2
Amp
Room
DCP
ID=1
Entrance
(Zone 3)
Wireless Microphone Reciever
MTX3 ID=01
CD Player
BGM Player
XMV4280 ID
=1A
MTX Setup Manual
Introduction
3