Yamaha MTX Series Setup Manual page 153

Verifying that the settings were applied
The main items to verify are listed below. For details on each parameter's settings, refer to "MTX-MRX Editor User
Guide."
1.
Use the oscillator in the "ROUTER" screen to adjust the output level.
Adjust the attenuator values of the amps to appropriate levels.
The XMV's attenuator values can be adjusted in a popup that is recalled by the port/external device parameter access
button in the output channel area of the "MAIN" screen.
2.
Specify the gain from the mics.
Specify the gain in the dialog box that is recalled by the port/external device parameter recall button in the input chan-
nel area of the "MAIN" screen. Watch the input meter, and adjust the setting appropriately.
3.
Specify the input levels and output levels.
Using the input/output faders of the "MAIN" screen, specify the levels. As necessary, apply the output limiter in the
"CHANNEL EDIT" screen to prevent your speakers from being damaged.
Adjust the amp's attenuator value to obtain the optimal S/N ratio.
In addition, make FBS settings as necessary.
4.
Store the preset.
When you have finished making all settings, save the project and switch MTX-MRX Editor offline.
This completes the settings for example 5.
Example 5) A system using the PGM1 for paging
MTX Setup Manual
153