Yamaha MTX Series Setup Manual page 124

Example 5) A system using the PGM1 for paging
Place the "Paging" component, and assign broadcast destinations (zones, zone groups) or pre-recorded messages to the
zone/message select buttons of the PGM1.
You can use the buttons to select the broadcast destination (multiple selections are allowed) and play back pre-recorded
messages from the SD card.
Paging Device Group 1
MRX7-D ID=01
SWR2100P-10G
Paging Device Group 2
MTX5-D ID=02
Up to four PGM1 units can be connected to an MTX/MRX system that includes an MTX5-D. One PGM1 unit can control
one MTX5-D, and this PGM1 together with the MTX5-D are collectively called a Paging Device Group. One of the PGM1
units within the Paging Device Group is the 1
units.
There are three ways to use the PGM1.

Broadcast from the mic.
1.
Use the zone/message select buttons to select the broadcast area.
2.
Press the PTT button.
If specified, the Opening Chime is heard.
3.
When the status indicator is lit red, speak into the mic.
4.
When you finish speaking, press the PTT button.
If specified, the Closing Chime is heard.
P
PGM1
ID=60
PGM1
ID=61
PGM1
ID=62
P
PGM1
ID=63
st
Priority Mic; this unit can broadcast taking priority over the other PGM1
PGX1 PGX1
ID=0 ID=1
PGX1 PGX1
ID=0 ID=1
PGX1 PGX1
ID=0 ID=1
=Priority microphone
PGX1 PGX1
ID=0 ID=1
MTX Setup Manual
124