Yamaha MTX Series Setup Manual page 154

Q&A
Q:
If YDIF connections are in a ring, does the order of connections matter?
A:
The order is very important. If you ignore the order, it will not be possible to correctly specify the YDIF routing. Make
connections according to the "Configuration Diagram" displayed in [File] menu → [Print Configuration Diagram].
Q:
How should I make connections when daisy-chaining the Dante network connections in example 4?
A:
Make connections as follows.
Do not route the connection from the System B network switch to the System B XMV4280-D via the System A net-
work switch. This will cause the Dante network to loop within System B, making communication impossible.

System A
EXi8
ID=02
MTX5-D
ID=01
EXo8
ID=03
Network Switch
to the System B Network Switch for Primary
Main
Microphone
to the System B XMV4280-D
BGM Player
CD Player
Room A
Power Amp 3
Power Amp 4
Room B
Power Amp 1
Power Amp 2
MTX Setup Manual
154