4.
Set the MTX's [UNIT ID] rotary switch and DIP switch.
You will set the computer's IP address after completing the wizard, in
If the MTX is not nearby, make settings during the step
Make the following settings.
MTX3
5.
When you've finished setting the MTX's [UNIT ID] rotary switch and DIP switch, click
[Next>].
Example 1) Basic MTX3 system example (analog connections)
"Specifying the computer's TCP/IP
"Connecting the
equipment."
UNIT ID = 01
[UNIT ID] rotary switch = 1
DIP switches are all OFF (upward)
address."
11
MTX Setup Manual