Yamaha MTX Series Setup Manual page 70

Example 3) Using cascade mode to add MTX input channels (analog connection)

Settings in the "ZONE" screen
In the "ZONE" screen you can make Priority DUCKER settings. The Priority Ducker function temporarily attenuates
the inputs from other channels when audio is input from a specified input channel, ensuring that the audio from the
st nd
specified input channel will be broadcast clearly. Priority is given in the order of "1 PRIORITY > 2 PRIORITY >
Matrix Out signals."
ZONE select
button
In this example, the chairman's microphone (assigned to CH8 of UNIT ID=01) has the highest priority. Thus, we select
st st
CH8 as the PRIORITY SOURCE for 1 PRIORITY in ZONE 1, and click the [ON] button located at the right of 1
PRIORITY to make it light. Since there is no need to make settings for ZONE2 through 8, make sure that the [ON] but-
st nd
tons at the right of 1 PRIORITY and 2 PRIORITY are unlit (turned off).
Use the ZONE select buttons to switch the zone.
For details on each parameter, refer to "MTX-MRX Editor User Guide."
70
MTX Setup Manual