Yamaha MTX Series Setup Manual page 14

Making preliminary settings in MTX-MRX Editor
Here's how to make detailed MTX/MRX System settings in MTX-MRX Editor.
When you've finished making settings, you should save them by clicking [File] menu, then [Save].
NOTE
The "User Account Control" dialog box may appear. Click [Continue] or [Yes].

Specifying the MTX configuration
Here you'll specify how the MTX's inputs and outputs will be handled.
Move to the System screen by clicking the tab of the system name you specified in step 1 of
uration Wizard to create your device
On the [System] menu, click [MTX Configuration] to open the "MTX Configuration" dialog box.
The default settings are shown in the screen below. You can change them as necessary. In this example, we'll use the
default settings without change.
Example 1) Basic MTX3 system example (analog connections)
setup."
"Using the Device Config-
MTX Setup Manual
14