HP CodeMaster XL+ M1722A User Manual page 89

Installation and Setup
Setup
You must depress both sides of the
NOTE
setup/diagnostic menu.
11 To change settings in setup menu 2, select
12 Turn the Energy Select control to Off (Standby) to leave setup/diagnostic mode.
You can use the factory setting for most values by selecting
The setting values can have critical impact on how your
WARNING
defibrillator operates.
If the CodeMaster XL+ loses your configuration settings, it will
display the message
settings for all setup values. To clear the
to setup menu 1 or setup menu 2. The "Setup Lost" condition will
be cleared when you view the setup menus. You do not have to
change the values if you want to keep the factory settings.
Table 1-1, "Setup Menu 1 Settings," on page A-9 and Table 1-2, "Setup Menu 2
Settings," on page A-10 show configurable parameters on the instrument.
Table 1-1 Setup Menu 1 Settings
Setting Choices
Language English, Dutch, Swedish, French, German,
Italian, Spanish, Finnish, Danish, Norwegian
Upper Alarm 120, 140, 160, 20 to 280 in increments of 5
Limits (UAL)
Lower Alarm 40, 60, 90, 20 to 280 in increments of 5
Limits (LAL)
diagnostic menu and repeat the above steps.
RESTORE FACTORY SETTINGS
ECG Size
key at the same time to return to the
SETUP MENU 2
from the setup/diagnostic menu.
on the screen and use the factory
SETUP LOST
Description
Printed and displayed text language
Upper heart rate limits LAL to 280
Lower heart rate limits 20 to UAL
from the setup/
message, go
SETUP LOST
A-9