User Management - Huawei ECC500 User Manual

ECC500 (Data Center)
User Manual
Parameters
Read Community
Write Community
User Name
Password
Trap IP
Trap Port

5.2.2.5 User Management

On the User Management tab, you can create, modify, and delete user information, as shown
in
You can add a user to the admin, engineer, or operator group. The operation rights vary with
groups.
Issue 06 (2020-01-06)
Select Disable other configure option, to prevent SNMP configuration has been modified and protect
the configured information.
Figure 5-16.
Copyright © Huawei Technologies Co., Ltd.
Description
Set read permissions of network management software to connect
the ECC, the default value is read.
Value range: a-z, A-Z, 0v9 (you can input up to 15 character).
Set write permissions of network management software to connect
the ECC, the default value is write.
Value range: a-z, A-Z, 0-9 (you can input up to 15 character).
Set a specific user to connect ECC.
Value range: a-z, A-Z, 0–9 (you can input up to 15 character).
Connect ECC passwords.
Value range: a-z, A-Z, 0-9. The character length is more than 8
and less than 15.
Trap IP is the IP address of PC, which is report SNMP alarm
information. And the IP address is planning by carrier.
Trap port is the PC port, which is report SNMP alarm information,
the default value is 162.
Value range: 0–65535.
5 User Interface Description
42