3. Drag the unspecified infeed to the device view.
Figure 4-6
Result
The DRIVE-CLiQ connection is automatically established. The unspecified infeed must now
be specified in more detail.
4.4.5.2
Specifying an infeed unit
Initially, after creating an infeed unit in the configuration, only one non-specified placeholder
is available. Using an article number, this placeholder must be specified in more detail. As a
consequence, you ensure that the components in the device view correspond to the
components that you have integrated into your drive system.
Based on the color of the placeholder, you can identify as to whether a component has been
specified or not specified:
● White = component is not specified
● Dark gray = component is specified
Commissioning with Startdrive
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0
Infeed inserted
4.4 Creating a project offline in Startdrive
Commissioning
89