Startdrive commissioning tool
2.5 User interface - trace function
2.5
User interface - trace function
2.5.1
Configuration
The user interface of the trace function comprises several areas.
The following diagram shows as example, the structure of the trace user interface in
Startdrive:
Project navigator
Working area
①
Trace toolbar
②
Status display of the
trace
③
Configuration tab
④
Diagram tab
⑥
Trace tab
⑦
Inspector window
Figure 2-11
Trace user interface
46
Management and creation of the trace and measurements directly in the project tree and via
shortcut menu commands.
Icons to manage the traces in the project and device.
Display of the current recording status. The status is displayed only in online mode.
Device-specific configuration of the recording duration, trigger condition and signal selection
Display of the recorded values as a curve diagram and the signal sources from the displayed
measurement
Display of the measurement cursor data and snapshots.
Display of general information regarding the trace configuration
Commissioning with Startdrive
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0